PRS SE Angelus Standard Being Set Up in Stevensville

Snapshot: Around The Factory

Filed Under Acoustics / SE Acoustics

<p>SE Angelus Standard being set up</p>

A PRS SE Angelus Standard being set up by the SE team in Stevensville, Maryland

A particularly nice piece of ribboned mahogany:

A particularly ribboned piece of mahogany

Comments (7)

Hunter@PRS April 04, 2016 - 10:55am
Hey Tom, sorry to hear about your troubles with your SE Angelus! That is not a recurring problem we have been having. Please e-mail our customer service department to explain the issue, you can reach them at custserv@prsguitars.com
Tom Sawyer (really!) April 02, 2016 - 4:04pm
I own a PRS SE Angelus (rosewood, serial# C04152) and after several string changes it has developed an annoying sympathetic vibration from inside the tone chamber, especially noticeable when playing unplugged. I've re-secured all of the wiring to be sure there are no vibrations from the harnesses. The vibration problem can be created just by "thumping" the bridge. Any suggestions or advice? I have a complete and properly tooled guitar repair shop in my basement and I've never seen a vibration problem as annoying as this one.
Terry wall February 20, 2014 - 10:14am
I have a Prs se custom angelus with out electronic pickup. I would like to add your pickup system where do I purchase on Thanks Terry wall
Don August 25, 2012 - 12:54pm
Any word on when the SE with electronics will begin to ship?
Guy June 16, 2012 - 3:40pm
Well I think PRS are positioning their aoiustccs alongside Taylor and Martin in which case if the quality is the same then a lot of professional guitarists will buy them, they're probably not about to start pumping out these guitars off a production line unless they think it is going to be profitable. I paid $2000 Aussie dollars for an acoustic 4 years ago, but I would never buy another acoustic because i have too much G.A.S. for electrics, amps, effects!
Dan scharman June 08, 2012 - 5:15pm
Please let me know your best beginner acoustic guitar if money is not a problem ? Se angelus or the angelus made in the USA ! It would be great if you could answer this. I've looked at Taylor , Martin Etc etc
JD Bradshaw May 28, 2012 - 8:21am
I will be adding one of these to my onstage arsenal of PRS Guitars...100% cool!

Add A Comment

All fields are required. Your email address will not be displayed with your comment.